Geared motor TOM4024E REVERSE
Commercial use
230 Vac
24 Vdc
Up to 4.0 m per door leaf
Integrated device that guarantees maximum precision during the automation manoeuvring steps
Prepared for the connection of X.BE (KNX) and Q.BE (MQTT) accessories
Designed to manage the control unit using the BeUP app and pro.UP accessory which, by recreating the control unit menu, makes it possible to adjust parameters and logic, read error messages and update the firmware. It is possible to perform remote diagnostics, check the status of the gate and send commands
TOM4024E REVERSE
Reversible 24 Vdc electromechanical gear motor for intensive use equipped with encoder | It is the ideal solution for automating entrances where uninterrupted access must always be guaranteed, for example in compliance with local accessibility regulations or where there is no alternative pedestrian entrance | The encoder guarantees maximum safety and precision while the gate is moving | Amperometric sensor obstacle detection system to prevent crushing | Possibility of battery operation | Reliable and innovative gear motor, thanks to the 2 adjustable mechanical stops in opening and closing accessible from above and positioned under the metal cover of the shaft. Ideal for the automation of any type of swing gate thanks also to the compact footprints (only 96 mm width) and screw-in brackets. The 45° inclination of the wiring cable allows the distance from the ground to be reduced to a minimum | The rear and front brackets, aligned on the same axis, enable the better distribution of loads by optimizing the lifespan of the operator. The worm screw protected by wiper ring and stainless steel shaft make it suitable for dusty or sandy environments, or places with aggressive weather conditions | Easy access release from above
| Use | commercial |
| Motor supply | 24 Vdc |
| Max absorbed current | 5,5 A |
| Maximum thrust | 1500 N |
| Opening time | 8" |
| Max stroke | 400 mm |
| Duty cycle | intensive use |
| Protection level | IP44 |
| Reversible version | |
| Mechanical stops | |
| Limit switch | |
| Encoder | |
| Operating temperature | -20°C /+50°C |
| Leaf max dimension | 4 m |
| Weight | 8.9 kg |
| N. motors per pallet | 42 |
BRAINY
PRIMJENA
1 ili 2 aktuatora za krilna vrata, suprotna klizna vrata, hidraulične operatore i industrijska harmonika vrata
NAPAJANJE UPRAVLJAČKE JEDINICE
230 Vac - 50/60 Hz
NAPAJANJE MOTORA
230 Vac / 600 W + 600 W
GLAVNE FUNKCIJE
Integrirani LCD zaslon | Integrirani radio prijamnik 433,92 MHz sa 64 koda i 3 sustava kodiranja (Advanced Rolling Code, Rolling Code, Fixed Code) | Uklonjivi terminalni blokovi | Automatska, poluautomatska logika i logika "mrtav čovjek" | Ulaz enkodera za detekciju prepreka | Zasebni ulazi graničnih prekidača za svaki motor | Ulazi za otvaranje, zatvaranje, pješački prolaz, korak po korak i zaustavljanje | Zasebni ulazi fotoćelija u fazama otvaranja-zatvaranja i zatvaranja | Ulaz za N.C ili 8K2 osjetljivi rub | Izlaz za električnu bravu 230 Vac i 12 Vac/dc | Izlazi za konfiguraciju kao indikator otvorenih vrata, servisno svjetlo, drugi radio kanal i testiranje fotoćelija | Izlaz za spajanje bljeskalice | Automatsko postavljanje radnih parametara (s motorima opremljenim enkoderom) | Zasebno elektroničko podešavanje zakretnog momenta za svaki motor i vremena rada | Podesiva usporavanja | Advantouch sustav za konfiguriranje parametara i upravljanje radio odašiljačima | Broj manevara | Lozinka za pristup programiranju | Upozorenje o održavanju | Potrošnja energije u stanju pripravnosti usklađena je s europskom uredbom (EU) 2023/826
BRAINY PLUS
APPLICATION
1 or 2 actuators for swing gates, opposed sliding gates, hydraulic operators, and industrial folding doors
CONTROL UNIT POWER SUPPLY
230 Vac - 50/60 Hz
MOTORS POWER SUPPLY
230 Vac / 600 W + 600 W
MAIN FUNCTIONS
Integrated LCD display | Integrated 433.92 MHz radio receiver with 512 codes and 3 radio encodings (Advanced Rolling Code, Rolling Code, Fixed Code) | Removable terminal boards | Automatic, semi-automatic and dead man’s logic | Encoder input for obstacle detection | Separate limit switch inputs for each motor | 6 opto-isolated inputs configurable as open, close, pedestrian, step-by-step, stop, active photocell during opening-closing and photocell active only during closing | 2 separate inputs for sensitive edges configurable according to operation and type | Output for 230 Vac and 12/24 Vdc electric lock configurable | Outputs configurable as gate open indicator light, second radio channel, courtesy light, area light, accessory test output, flashing output, gate open alarm and NC input alarm | Autoset operating parameters with all motor types | Separate electronic adjustment of torque for each motor and of opening and closing times | Electronic torque adjustment with automatic calculation for each point of the stroke (STC SYSTEM) | Adjustable slowdowns | Integrated ESA+ for energy saving | Prepared for connection of X.BE (KNX) and Q.BE (MQTT) | Configuration, diagnostics, firmware update, and radio control management via the BeUP app, using the PRO.UP accessory | Number of operations | Programming access password | Maintenance warning | Standby power consumption complies with European regulation (EU) 2023/826
TRUST24
APPLICATION
1 or 2 actuators for swing gates
CONTROL UNIT POWER SUPPLY
100 ÷ 250 Vac - 50/60 Hz
MOTORS POWER SUPPLY
24 Vdc / 130 W + 130 W
MAIN FUNCTIONS
Integrated LCD display | Integrated radio receiver 433.92 MHz 512 codes with ARC coding | Removable terminal boards | Separate limit switch inputs for each motor | Automatic, semi-automatic and Deadman logic | Separate encoder inputs for each motor | Open, close, step-by-step and pedestrian inputs | Input for programmable photocell active in opening-closing and photocell active only in closing | Input for N.C. or 8k2 sensitive edge | Output for electric lock 12/24 Vdc | Two outputs configurable as open gate signal light, courtesy light, zone light, second radio channel, photocell testing, flashing light, alarm contact | Autoset operating parameters | Separate electronic torque adjustment for each motor| Anti-crushing safety through amperometric detection and encoder management | Electronic torque adjustment with automatic calculation for each point of the stroke (STC SYSTEM) | Separate adjustable slowdowns for each motor | Possibility of encoder- or time-based operation (managed through virtual encoder) even independently between the two motors | Built-in energy saving system ESA+ | Set up for connection to KNX systems via X.BE card (optional) | Designed for managing, configuring, diagnosing and updating firmware through the BeUP app, using the PRO.UP accessory | Advantouch system to configure parameters and manage radio transmitters | Number of manoeuvres | Programming access password | Maintenance warning | Built-in battery charger | Standby power consumption complies with European regulation (EU) 2023/826
